Bleaches in
Woodworking
Picking Your Finish
Purpleheart's Purple
How To Apply A Wood Finish
|
|
|
This is a 1 gallon jug of a Anchorseal wax emulsion.
I offer a full money back guarantee, if not fully satisfied.
Buy with confidence.
Priced at $19.95 per gallon.
See for yourself, the difference above is a log that had no wax emulsion,
and one that did.
BENEFITS --- stops most end checking before it begins. The sooner end sealer is
applied, the more effective it will be. Depending on the species, 5 - 20% of your
logs and lumber can be saved by using immediately after sawing.
SUPERIOR QUALITY --- is known in the forest products industry as
the best quality sealer and most stable wax emulsion coating available. For over
two decades, it has been the sealer of choice in the hardwood industry.
PROVEN RESULTS --- Independent studies* have concluded that end
coating has great benefit by reducing degrade. In freshly sawn lumber it reduces
end checking losses. In freshly cut logs, it reduces blue stain and end checking.
APPLICATION
1. Apply as soon as possible after cutting or end trimming, to all end grain surfaces.
On valuable veneer logs, areas where bark is removed should also be treated.
2. Apply with a brush, roller, or with spray equipment. If a sprayer is used, the
tip must be large enough to accommodate the thick emulsion.
3. Valuable logs will benefit from a heavy application. Logs under 24"/60cm can
be coated "to the drip". Logs over 24"/60 cm should be coated very heavily, perhaps
twice within 15 minutes. The increase in value/yield from the larger logs will be
worth the little extra time and wax used.
Advertising, below.
|